PEEK extrusion RODS with high quality
Product Description
PEEK extrusion RODS
PEEK rod is an extremely tough, wear resistant plastic with excellent resistance to high temperatures and energy radiation. It is very dimensionally stable and has a high mechanical bearing strength. PEEK rod also offers excellent chemical resistance and a high resistance to hydrolysis, even against super-heated steam. PEEK rod is also electrically insulating and has good sliding properties.
Photo
Specification
| Number | Rod diameter(mm) | Weight per meter(g) | Dimension tolerance (mm) | |||
| 100%PEEK | PEEK+30%Glass fiber | PEEK+30% Carbon fiber | PEEK+30% (Carbon fiber+Graphite+PTFE) | |||
| 1 | 5 | 31 | 33 | 34 | 32 | 0-0.2 |
| 2 | 6 | 42 | 46 | 47 | 45 | 0-0.2 |
| 3 | 7 | 55 | 61 | 63 | 59 | 0-0.2 |
| 4 | 8 | 70 | 78 | 80 | 75 | 0-0.2 |
| 5 | 10 | 107 | 119 | 123 | 115 | 0-0.2 |
| 6 | 12 | 152 | 169 | 175 | 163 | 0-0.2 |
| 7 | 15 | 235 | 261 | 270 | 252 | 0-0.2 |
| 8 | 18 | 336 | 374 | 387 | 361 | 0-0.2 |
| 9 | 20 | 413 | 460 | 476 | 445 | 0-0.2 |
| 10 | 22 | 499 | 556 | 575 | 537 | 0-0.2 |
| 11 | 25 | 663 | 736 | 761 | 712 | 0-0.5 |
| 12 | 28 | 825 | 917 | 948 | 887 | 0-0.5 |
| 13 | 30 | 943 | 1049 | 1085 | 1014 | 0-0.5 |
| 14 | 33 | 1136 | 1265 | 1307 | 1222 | 0-0.5 |
| 15 | 35 | 1275 | 1419 | 1467 | 1371 | 0-0.5 |
| 16 | 38 | 1499 | 1669 | 1725 | 1612 | 0-0.5 |
| 17 | 40 | 1658 | 1846 | 1909 | 1783 | 0-0.5 |
| 18 | 42 | 1825 | 2033 | 2102 | 1964 | 0-1.0 |
| 19 | 45 | 2102 | 2330 | 2409 | 2250 | 0-1.0 |
| 20 | 48 | 2386 | 2648 | 2738 | 2557 | 0-1.0 |
| 21 | 50 | 2586 | 2881 | 2979 | 2783 | 0-1.0 |
| 22 | 53 | 2902 | 3232 | 3343 | 3122 | 0-1.0 |
| 23 | 55 | 3122 | 3478 | 3597 | 3359 | 0-1.0 |
| 24 | 60 | 3699 | 4133 | 4274 | 3991 | 0-1.0 |
| 25 | 65 | 4317 | 4864 | 5030 | 4698 | 0-2.0 |
| 26 | 70 | 5055 | 5632 | 5825 | 5440 | 0-2.0 |
| 27 | 80 | 6586 | 7340 | 7591 | 7089 | 0-2.0 |
| 28 | 85 | 7428 | 8279 | 8562 | 7995 | 0-2.0 |
| 29 | 90 | 8321 | 9275 | 9593 | 8957 | 0-2.0 |
| 30 | 95 | 9265 | 10328 | 10682 | 9973 | 0-2.0 |
| 31 | 100 | 10260 | 11438 | 11830 | 11045 | 0-2.0 |
| 32 | 110 | 12403 | 13828 | 14303 | 13353 | 0-2.0 |
| 33 | 120 | 14750 | 16446 | 17011 | 15881 | 0-2.0 |
| 34 | 130 | 17301 | 19291 | 19955 | 18628 | 0-3.0 |
| 35 | 140 | 20057 | 22365 | 23134 | 21595 | 0-3.0 |
| 36 | 150 | 23016 | 25666 | 26549 | 24783 | 0-3.0 |
| 37 | 160 | 26180 | 29194 | 30199 | 28189 | 0-3.0 |
| 38 | 165 | 27838 | 31044 | 32112 | 29975 | 0-3.0 |
| 39 | 180 | 33149 | 36964 | 38206 | 35663 | 0-3.0 |
| 40 | 200 | 40905 | 45615 | 47155 | 44015 | 0-3.0 |
| 41 | 220 | 49477 | 55176 | 57046 | 53247 | 0-3.0 |
| 42 | 250 | 63866 | 71226 | 73649 | 68743 | 0-3.0 |
Main Properties
| Item | Test Standard | Unit | PEEK450G | PEEK450GL30 | PEEK450CA30 | PEEK450FC30 |
| 100%PEEK | PEEK+30%Glass fiber | PEEK+30% Carbon fiber | PEEK+30% (Carbon fiber+Graphite+PTFE) | |||
| Color |
|
| Natural or Black | Natural or Black | Black | Black |
| Density | ISO1183 | g/cm3 | 1.3±0.01 | 1.5±0.01 | 1.4±0.01 | 1.43±0.01 |
| Water Abs(25℃,24Hrs) | ISO 62 | % | 0.5 | 0.11 | 0.06 | 0.06 |
| Mould shrinking percentage | 3mm,170℃ Flow direction | % | 1.2 | 0.4 | 0.1 | 0.3 |
| Perpendicular to flow direction | % | 1.5 | 0.8 | 0.5 | 0.5 | |
| Melting point | DSC | ℃ | 343 | 343 | 343 | 343 |
| Distortion temperature | ASTM D648 | ℃ | 163 | 315 | 315 | 293 |
| Continuous using temperature | UL 74685 | ℃ | 260 | 260 | 260 | 260 |
| Coefficient of thermal expansion | ASTM D 696 | 10-5℃ | 2.2 | 1.5 | 2.2 | 4.7 |
| Tensile strength(23℃) | ISO527-2/1B/50 | Mpa | 100 | 155 | 220 | 134 |
| Tensile elongation(23℃) | ISO527-2/1B/50 | % | 34 | 2 | 1.8 | 2.2 |
| Bending strength(23℃) | ISO 178 | Mpa | 163 | 212 | 298 | 186 |
| Compressive strength(23℃) | ASTM D695 | Mpa | 118 | 215 | 240 | 150 |
| Lzop impact strength(no gap) | ISO 180/U | KJ/m2 | No break | 51 | 46 | 32 |
| Rockwell hardness | ASTM D785 |
| 103 | 107 | 102 | 99 |
| Flammable level | UL 94 | V-0@mm | 1.5 | 1.5 | 1.5 | 0.75 |
| Dielectric strength | IEC 248 | KM/mm | 18 | 19 |
|
|
| Dielectric constant | IEC 250 |
| 3.2 | 3.2 |
|
|
| Surface resistivity |
| Ω | 1015 | 1015 | 3*106 | 5*106 |
| Friction coefficient |
| µ | 0.30-0.38 | 0.38-0.46 | 0.28 | 0.18 |
Our Service
1)Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2)Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3)General samples time can be arranged within 2--5days.
4)Orders will be produced exactly as request and approved samples.
5)When mass production,we send photos to show the production line.And confirm the estimate time again.
6)At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7)Before shipment,our QC will have inspection to make sure the quality.
8)We always try best to ensure every order to delivery in time.
Payment Terms
1)T/T,Cash,L/C.
2)30% deposit,70% balance before shipment.
3)Lead time: 15 days after received deposited for 2tons.
4)Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.
Packing & Delivery
For sample: By EMS,DHL,UPS,TNT,FedEx
around 5--7 working days to arrive
For Bulk order:
1.Qty of 2tons,within 15 days.
2.Via Sea
3.Delivery time:we will finish production in 15days for 2tons.
4.For 20 GP,may nee around 30days.
Our Company
About us:
Zhenjiang Chunhuan Sealing Material Co., Ltd is located in Yangzhong City Jiangsu Province who is a director member of China Plastic Association fluorine plastic processing Specialized Committee.Chunhuan was founded in 1985, our group has now emerged as one of the large-scaled backbone enterprises in the field of PTFE in China after 30-plus years of constant development.
Zhenjiang Chunhuan Sealing Material Co., Ltd is one of the fluoroplastics processing enterprises taking the lead in passing the IS09001 quality system certification. And with the strength of PTFE products, which are superior quality with FDA,REACH,RoHS,MSDS certificate.
Our group mainly manufactures products: PTFE rod, PTFE film, pipes, sheets & mats, PTFE push rods & extrude rods, PTFE turning plates & teflon film , PTFE fillings, PTFE belts, ropes, tapes & packing tapes, metallic gaskets, PTFE corrosion resistant linings, composited tubes & pipe fittings, rubber sheets, mats, framework oil seals & o-rings.
All people from Chunhuan Brand group will continue to bring the best and most considerate service to all of our devoted old customers; meanwhile we sincerely hope that we will extend our service to more new customers.
Product Categories : Engineering Plastics Products